Automotive Smoke Leak Detector Tester EVAP Smoke Machine with Dual Mode

【Why Need It】Car Smoke Leak Detector is a professional auto pipe leak detect tool. The smoke can be produced within 7-15 seconds, dramatically reducing diagnostic time. Smoke output value: 1-6L/min. 【Flow Meter & Pressure Gauge】According to the pressure of the detection pipeline, it is controlled with a flowmeter to more effectively protect the pipeline from damage. By observing the pressure gauge, you can determine whether the pipeline is leaking more quickly and accurately. Usually the pressure gauge continues to rise, indicating that there is no problem with the pipeline. If the pressure gauge continues to decrease, Explain that the pipeline leak needs to be repaired. 【EVAP Detection】American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system. 【Wide Testing Range】Built-in air pump,The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats. How to operate? 1. Open the engine cover, and hang the detector in the cover. 2. Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle. Please secure the other side with a rubber stopple. 3. Secure this side with proper taper stopple/pipe, and connect it with smoke output tube. 4. Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way. 5. Turn on the power switch, and detector starts to work. 6. Adjust the flow gauge. Control the input smoke value and pressure to make sure the pipe system can afford the pressure. 7. In about 3 minutes, the pipe will be filled with smoke. 8. Observe the floating ball in flow gauge. If the floating ball stays still in the bottom, the pipe is sealed with. If the floating ball is arising or bouncing, the pipe is leaking. 9. Position the leak points by floating ball. If the bounce arises highly, the leakage is serious. 10. Check the leak points. Please use head lamp if necessary. 11. After leak detection, please connect well the wires and pipe. Packing List: 1pc * AUTOOL SDT 206 Car Smoke Leak Detector Main Unit 1pc * Hook (with hand-tighten nuts) 1pc * Rubber Connect Parts 1sets * Hard Rubber Hose Plug (with serial specification) 1sets * Soft Rubber Hose Plug (with serial specification) 1pc * Standard Cone Adapter 1pc * Universal Airbag Adapter 1pc * Power Cord Clamp 1pc * Valve Core Wrench 1pc * Test Oil Refill Bottle(oil not included) 1pc * EVAP Special Connector 1pc * Smoke Hose 1pc * User Manual

Order Processing: After your payment is authorized and verified, we will start processing your order and this process can take from 1 to 2 business days, so please be patient with us. If we are unable to process your order due to inaccurate or incomplete payment or incorrect address information, your order processing may be delayed.

Carrier: UPS/FedEx/USPS. Delivery Timescale: More than 90% of orders arrive in 10 business days after despatch.

FREE RETURNS on all orders!
The following conditions must be met:

1. Items must be returned within 30 days after the purchase date.
2. Items must be unworn, undamaged and in original packaging.