Dayton 6C052 Alternating Relay

Alternating Relays with DPDT cross-wired outputs are used in applications requiring both a the optimization of load usage by equalizing the run time of two loads and b additional capacity in case of excess load requirements. This alternating action is initiated by a control switch such as a float switch pressure switch or other isolated contact. Each time the initiating switch is opened the output relay contacts will change state thus alternating the two loads. Two LEDs indicate which load will energize first. These products are typically used to control two loads when the need to have both loads on at the same time for additional capacity is required. However they can be used with only one input devicesimply wiring the single input device where the LEAD input is shown on the wiring diagram and disregard the second input or LAG switch. A three-position selector switch is offered. This allows a DPDT cross-wired unit to alternate the two loads as normal or lock the relay to always operate the same load first each time. A load that has fewer hours of operation than the other load could be used more often to eventually balance the run time of both loads. The selector switch has a low-profile to prevent any accidental changes in status.

Order Processing: After your payment is authorized and verified, we will start processing your order and this process can take from 1 to 2 business days, so please be patient with us. If we are unable to process your order due to inaccurate or incomplete payment or incorrect address information, your order processing may be delayed.

Carrier: UPS/FedEx/USPS. Delivery Timescale: More than 90% of orders arrive in 10 business days after despatch.

FREE RETURNS on all orders!
The following conditions must be met:

1. Items must be returned within 30 days after the purchase date.
2. Items must be unworn, undamaged and in original packaging.